Staff Achievements (2019-20)
| S.NO | NAME OF THE FACULTY | TITLE OF THE WORK | ACHIEVEMENT |
|---|---|---|---|
| 1 | Dr.R.Sasikumar,
M.E., PhD., |
Influence of Feeding Techniques in Bottom Tapping Stir Casting Process for Fabrication of Alumina Nano-filler-reinforced Aluminium Composites | Published Paper in “Transactions of the Indian Institute of Metals (TIIM) – Springer” (Anna university Annexure – 1 listed journal), 12 April 2020, Volume 73, Issue 5, Pages 1265–1272 |
| Analysis Of Mechanical And Wear Behaviour Of PEEK, PTFE and Polyurethane soft materials for industrial Robotic Applications | Submitted Research article to Journal of Defense Technology (Under Review) for Publication. | ||
| Mechanical and Fire Performance of Aluminium Hydroxide Filled E-Glass/Phenolic Hybrid Composites | Research work published in Materials today: proceedings, Elsevier publications, DOI: 10.1016/j.matpr.2020.08.649. | ||
| Modeling of Multiwall Carbon Nanotubes Reinforced Natural Rubber for Soft Robotic Applications – A Comprehensive Presentation | Research work submitted to Materials today: proceedings (Accepted). | ||
| Production and Optimization of Nano Crystalline Materials, 2019 | Book chapter published in Lambard academic publications, UK, ISBN Number: 978-613-9-84188-2. | ||
| Significance of Boron Nitride in Composites and Its Applications, 2019 | Book chapter published in Intech Open Publications, UK,DOI:10.5772/intechopen.81555 | ||
| Mechanical and morphological behavior of rice husk/prosopis juliflora reinforced bio composites | Research Article published in Materials today: proceedings, December 2019, DOI: 10.1016/j.matpr.2019.12.021 () | ||
| Mechanical Behaviour of Basalt / Carbon / Aluminium Fiber Metal Laminates – An Experimental Study | Research work published in “The International Journal of Engineering and Science”, Vol. 8 (3), 2019. | ||
| Mechanical Behaviour of Aluminium Powder Modified Carbon/Basalt Reinforced Vinyl Ester Composites | Research work published in IOSR Journal of Polymer and Textile Engineering (IOSR-JPTE),Vol. 6 (1), 52-58, 2019 | ||
| Fabrication and Characterization of Basalt / Kevlar / Aluminium Fiber Metal Laminates for Automobile Applications | Research work published in International Journal of Materials Science, Volume 14 (1), 1-9, 2019. | ||
| 2 | Dr.G.Selvaraj, M.E., PhD., | Comparative analysis of FSW, TIGW and LBW techniques on AA8011with Optimization of FSW parameters by Taguchi Technique | Published paper in “Journal for the Study of Research”, Volume: 12, Issue 04, in April-2020 | ISSN (online): 1781-7838. |
| 3 |
Mr.S.Arumugam,
M.E., (PhD) |
Safety Audit in Green Engineering Work | Published paper in “International journal of Current science and Engineering”, Vol:2, Issue-5, May 2020; www.journalijcse.com |
| Occupational Safety And Health Administration In Forging Industry | Published paper in International Journal of Current Science and Engineering, Vol-02, issue-05, pp.0326-0327, 30thMay, 2020. | ||
| Tamilnadu State science and technology project competition. | Received Rs.5000/- for project funding from Tamilnadu State science and technology. | ||
| 4 | Mr.M.Anbalagan, M.E., | Safety Audit in Steels Industry. | Published paper in International Journal of Current Science and Engineering, Vol-02, issue-05, pp.0314-0318, 30thMay,2020. |
| 5 | Mr.I.Sirajudeen, M.Tech., | Safety Audit in Green Engineering Work | Published paper in “International journal of Current science and Engineering”, Vol:2, Issue-5, May 2020; www.journalijcse.com |
| 6 |
Mr.M.S. Santhosh, M.E., (PhD)
M.S. Santhosh
|
Mechanical and Morphological Behavior of Prosopis Juliflora / Rice Husk Reinforced Bio Composites, | Presented paper on “Recent Advances in Materials and Manufacturing (ICRAMM 2019)”, KLE Sheshgiri College of Engineering, Belagavi, Karnataka. |
| Mechanical and Tribological behavior of Al/Al2o3 and Al/SiC Aluminium Composite Fabricated via Powder Metallurgy. | Presented paper on “International Conference on Materials Science and Manufacturing Technology 2019”, Aloft International, Coimbatore | ||
| Analysis Of Mechanical And Wear Behaviour Of PEEK, PTFE and Polyurethane soft materials for industrial Robotic Applications | Submitted Research article to Journal of Defense Technology (Under Review) for Publication. | ||
| Mechanical and Fire Performance of Aluminium Hydroxide Filled E-Glass/Phenolic Hybrid Composites | Research work published in Materials today: proceedings, Elsevier publications, DOI: 10.1016/j.matpr.2020.08.649. | ||
| Modeling of Multiwall Carbon Nanotubes Reinforced Natural Rubber for Soft Robotic Applications – A Comprehensive Presentation | Research work submitted to Materials today: proceedings (Accepted). | ||
| Mechanical and morphological behavior of rice husk/prosopis juliflora reinforced bio composites | Research Article published in Materials today: proceedings, December 2019, DOI: 10.1016/j.matpr.2019.12.021 | ||
| Mechanical Behaviour of Basalt / Carbon / Aluminium Fiber Metal Laminates – An Experimental Study | Research Article published in The International Journal of Engineering and Science, Vol. 8 (3), 2019 | ||
| Mechanical Behaviour of Aluminium Powder Modified Carbon/Basalt Reinforced Vinyl Ester Composites | Research Article published in IOSR Journal of Polymer and Textile Engineering (IOSR-JPTE),Vol. 6 (1), 52-58, 2019 | ||
| Fabrication and Characterization of Basalt / Kevlar / Aluminium Fiber Metal Laminates for Automobile Applications | Research Article published in International Journal of Materials Science, Volume 14 (1), 1-9, 2019 | ||
| Mechanical and Tribological Behaviour of Al2O3 & SiC Reinforced Aluminium Composites Fabricated via Powder Metallurgy | Research Article published in IOP Conf. Series: Materials Science and Engineering, 561, 2019. doi:10.1088/1757-899X/561/1/012038. | ||
| Study of Corrosion Behavior of Carbon Fiber Reinforced Plastics (CFRPs) | Research Article published in Materials Science Forum, Vol. 969, pp 175-180, DOI: 10.4028/www.scientific.net/MSF.969.175. | ||
| Production and Optimization of Nano Crystalline Materials, 2019 | Book chapter published in Lambard academic publications, UK, ISBN Number: 978-613-9-84188-2. | ||
| Significance of Boron Nitride in Composites and Its Applications, 2019 | Book chapter published in Intech Open Publications, UK, DOI:10.5772/intechopen.81555 | ||
| Guest Talk On Development of advanced meta materials for industrial revolution 4.0 | One day Guest talk and hands on training delivered for the Mechanical students on the part of skill development program; QIS College of Engineering and Technology – Autonomous, Ongole, Andhra Pradesh. | ||
| 7 | Mr. S Prakash M.E., (PhD) | Influence of Feeding Techniques in Bottom Tapping Stir Casting Process for Fabrication of Alumina Nano-filler-reinforced Aluminium Composites | Research Article published in Transactions of the Indian Institute of Metals (TIIM) – Springer (Anna university Annexure – 1 listed journal), 12 April 2020, Volume 73, Issue 5, Pages 1265–1272 |
| 8 | Mr.R.Hariharan,
M.E., |
Mechanical and Tribological behavior of Al/Al2o3 and Al/SiC Aluminium Composite Fabricated via Powder Metallurgy. | Presented paper in “ICMSMT 2019”, Aloft International, Coimbatore |
| Fabrication and Characterization of Basalt / Kevlar / Aluminium Fiber Metal Laminates for Automobile Applications | Published paper in International Journal of Materials Science, Volume 14 (1), 1-9, 2019 | ||
| Mechanical and Tribological Behaviour of Al2O3 & SiC Reinforced Aluminium Composites Fabricated via Powder Metallurgy | Presented paper in IOP Conf. Series: Materials Science and Engineering, 561, 2019. doi:10.1088/1757-899X/561/1/012038. | ||
| 9 | Mr. P.Kannan, M.E., | Fabrication of Three Mode Four Wheeler Steering Mechanism | Presented paper in “National Conference on Recent Trends In Engineering Technology”, organized by Vetri Vinayaha College Of Engineering And Technology, Thottiyam. |
Staff Achievements (2018-19)
| S.NO | NAME OF THE FACULTY | TITLE OF THE WORK | ACHIEVEMENT |
|---|---|---|---|
| 1 | Dr.R.Sasikumar, M.E., PhD., |
Investigation of mechanical and electrical properties of Kevlar/E-glass and Basalt/E-glass reinforced hybrid composites. |
Published paper in “International Journal of Mechanical and Production Engineering Research and Development”, 2018, Vol. 8(3), 591-598. |
|
Multiwall Carbon Nano tube Reinforced Silicone for Aerospace Applications. |
Published paper in “International Journal of Mechanical and Production Engineering Research and Development”, Vol. 8 (4), 743-752, 2018. |
||
|
Superior material properties of hybrid filler-reinforced aluminum MMC through double- layer feeding technique adopted in bottom tapping stir casting |
Published paper in “High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes (Anna university Annexure – 1 listed journal)” ISSN Print: 1093-3611, ISSN Online: 1940- 4360 Vol. 22 Issue: 4, Article No.28877, Pages 249-258, (Sep 2018).
|
||
| 2 | Mr.I.Sirajudeen, M.Tech., |
Hazards Measuring and Risk Controls in Textile Industry |
Presented paper in One day National conference on “Challenges and Opportunities for Mechanical Engineers (COME-2019), organized by Kongunadu College of Engineering and Technology, Thottiyam
|
|
Hazards Measuring and Risk Controls in Textile Industry |
Published paper in “International Journal of Innovative Research in Science, Engineering and Technology”, Vol:8, issue:5,P.No:4976-4987, (April 2019).
|
||
|
Safety audit about fleet management in BPCL Karur terminal |
Published paper in “International Journal of Management, Technology And Engineering”, Vol:9, issue:4,P.No:3143-3147, (April 2019) |
||
|
Design and CFD analysis of brake disc. |
Published paper in “International Journal of Management, Technology And Engineering”, Vol:9, issue:4,P.No:3155-3157, Publ.date: April2019 |
||
|
Safety in ACETECH Machinery India PVL. |
Published paper in “International Journal of Management, Technology And Engineering”, Vol:9, issue:4,P.No:3165-3168, |
||
| 3 | Mr.M.S.Santhosh, M.E., (PhD) |
Mechanical, Microstructure and wear behavior of the material AA6061 reinforced SiC with different leaf ashes using advanced stir casting method. |
Presented paper in the conference “i7C – 2018” organized by HAL, Bangalore, Karnataka. |
|
Mechanical Behavior of Basalt/E-Glass Reinforced Epoxy Matrix Composites -Preliminary Experimental Study. |
Presented paper in conference on “Advances in Polymeric Materials (APM 2019)”, organized by CIPET Chennai, Tamilnadu. |
||
|
Investigation of mechanical and electrical properties of Kevlar/E-glass and Basalt/E-glass reinforced hybrid composites. |
Published paper in International Journal of Mechanical and Production Engineering Research and Development, 2018, Vol. 8(3), 591-598. | ||
|
Multiwall Carbon Nanotube Reinforced Silicone for Aerospace Applications. |
Published paper in International Journal of Mechanical and Production Engineering Research and Development, Vol. 8 (4), 743-752, 2018 |
||
| Design and Analysis of Connecting Tie Rod Assembly for Automotive Application | Published paper in Journal of Engineering Sciences, Vol. 5 (2), D15 – D20, 2018. | ||
| Mechanical, Microstructure and wear behavior of the material AA6061 reinforced SiC with different leaf ashes using advanced stir casting method | Published paper in International Journal of Engineering and Advanced Technology (IJEAT), Vol. 8 (2s), 366-371, 2018. | ||
| Mechanical Behavior of Basalt/E-Glass Reinforced Epoxy Matrix Composites -Preliminary Experimental Study | Presented paper on “Advances in Polymeric Materials (APM 2019)”, CIPET Chennai, Tamilnadu. | ||
| Effect of Pineapple/Coconut Sheath Fiber Reinforced with Polyester Resin Matrix | Presented paper in “ICMME 2019”, School of Mechanical Engineering, Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya University (SCVMV). | ||
| 4 |
Mr. S Prakash M.E., (PhD) |
Evaluation of Microstructure and Mechanical Properties of Hybrid Aluminum Metal Matrix Composites for Aircraft Wings | Presented paper in the conference on “Advancements in Mechanical, Manufacturing and Civil Engineering (NCAMMCE – 18)”, at M Kumarasamy College of Engineering, Karur |
| Investigation of Mechanical Properties of AA6061 Hybrid Metal Matrix Composites | Presented paper in the conference on Innovations in Science, Engineering and Technology for sustainable development (ISETSD- 2018), at Muthayammal Engineering College, Rasipuram. | ||
| Superior material properties of hybrid filler-reinforced aluminum MMC through double- layer feeding technique adopted in bottom tapping stir casting | Published paper in High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes (Anna university Annexure – 1 listed journal) ISSN Print: 1093-3611, ISSN Online: 1940- 4360 Vol. 22 Issue: 4, Article No.28877, Pages 249-258, ( Sep 2018) | ||
| 5 | Mr.R.Hariharan,
M.E., |
Mechanical and Morphological Behavior of Prosopis Juliflora / Rice Husk Reinforced Bio Composites. |
Presented paper in “Recent Advances in Materials and Manufacturing (ICRAMM 2019)”, KLE Sheshgiri College of Engineering, Belagavi, Karnataka. |
| 6 | Mr. P.Kannan, M.E., | Fabrication of Three Mode Four Wheeler Steering Mechanism | Presented paper in “National Conference On Recent Trends In Engineering Technology”, organized by Vetri Vinayaha College Of Engineering And Technology, Thottiyam. |