Staff Achievements (2019-20)

S.NO NAME OF THE FACULTY TITLE OF THE WORK ACHIEVEMENT
1 Dr.R.Sasikumar,

M.E., PhD.,

Influence of Feeding Techniques in Bottom Tapping Stir Casting Process for Fabrication of Alumina Nano-filler-reinforced Aluminium Composites Published Paper in “Transactions of the Indian Institute of Metals (TIIM) – Springer” (Anna university Annexure – 1 listed journal), 12 April 2020, Volume 73, Issue 5, Pages 1265–1272
Analysis Of Mechanical And Wear Behaviour Of PEEK, PTFE and Polyurethane soft materials for industrial Robotic Applications Submitted Research article to Journal of Defense Technology (Under Review) for Publication.
Mechanical and Fire Performance of Aluminium Hydroxide Filled E-Glass/Phenolic Hybrid Composites Research work published in Materials today: proceedings, Elsevier publications, DOI: 10.1016/j.matpr.2020.08.649.
Modeling of Multiwall Carbon Nanotubes Reinforced Natural Rubber for Soft Robotic Applications – A Comprehensive Presentation Research work submitted to Materials today: proceedings (Accepted).
Production and Optimization of Nano Crystalline Materials, 2019 Book chapter published in Lambard academic publications, UK, ISBN Number: 978-613-9-84188-2.
Significance of Boron Nitride in Composites and Its Applications, 2019 Book chapter published in Intech Open Publications, UK,DOI:10.5772/intechopen.81555
Mechanical and morphological behavior of rice husk/prosopis juliflora reinforced bio composites Research Article published in Materials today: proceedings, December 2019, DOI: 10.1016/j.matpr.2019.12.021 ()
Mechanical Behaviour of Basalt / Carbon / Aluminium Fiber Metal Laminates – An Experimental Study Research work published in “The International Journal of Engineering and Science”, Vol. 8 (3), 2019.
Mechanical Behaviour of Aluminium Powder Modified Carbon/Basalt Reinforced Vinyl Ester Composites Research work published in IOSR Journal of Polymer and Textile Engineering (IOSR-JPTE),Vol. 6 (1), 52-58, 2019
Fabrication and Characterization of Basalt / Kevlar / Aluminium Fiber Metal Laminates for Automobile Applications Research work published in International Journal of Materials Science, Volume 14 (1), 1-9, 2019.
2 Dr.G.Selvaraj, M.E., PhD., Comparative analysis of FSW, TIGW and LBW techniques on AA8011with Optimization of FSW parameters by Taguchi Technique Published paper in “Journal for the Study of Research”, Volume: 12, Issue 04, in April-2020 | ISSN (online): 1781-7838.
3  

Mr.S.Arumugam,

 

M.E., (PhD)

Safety Audit in Green Engineering Work Published paper in “International journal of Current science and Engineering”, Vol:2, Issue-5, May 2020; www.journalijcse.com
Occupational Safety And Health Administration In Forging Industry Published paper in International Journal of Current Science and Engineering, Vol-02, issue-05, pp.0326-0327, 30thMay, 2020.
Tamilnadu State science and technology project competition. Received Rs.5000/- for project funding from Tamilnadu State science and technology.
4 Mr.M.Anbalagan, M.E., Safety Audit in Steels Industry. Published paper in International Journal of Current Science and Engineering, Vol-02, issue-05, pp.0314-0318, 30thMay,2020.
5 Mr.I.Sirajudeen, M.Tech., Safety Audit in Green Engineering Work Published paper in “International journal of Current science and Engineering”, Vol:2, Issue-5, May 2020; www.journalijcse.com
6  

Mr.M.S. Santhosh, M.E., (PhD)

 

 

M.S. Santhosh

 

Mechanical and Morphological Behavior of Prosopis Juliflora / Rice Husk Reinforced Bio Composites, Presented paper on “Recent Advances in Materials and Manufacturing (ICRAMM 2019)”, KLE Sheshgiri College of Engineering, Belagavi, Karnataka.
Mechanical and Tribological behavior of Al/Al2o3 and Al/SiC Aluminium Composite Fabricated via Powder Metallurgy. Presented paper on “International Conference on Materials Science and Manufacturing Technology 2019”, Aloft International, Coimbatore
Analysis Of Mechanical And Wear Behaviour Of PEEK, PTFE and Polyurethane soft materials for industrial Robotic Applications Submitted Research article to Journal of Defense Technology (Under Review) for Publication.
Mechanical and Fire Performance of Aluminium Hydroxide Filled E-Glass/Phenolic Hybrid Composites Research work published in Materials today: proceedings, Elsevier publications, DOI: 10.1016/j.matpr.2020.08.649.
Modeling of Multiwall Carbon Nanotubes Reinforced Natural Rubber for Soft Robotic Applications – A Comprehensive Presentation Research work submitted to Materials today: proceedings (Accepted).
Mechanical and morphological behavior of rice husk/prosopis juliflora reinforced bio composites Research Article published in Materials today: proceedings, December 2019, DOI: 10.1016/j.matpr.2019.12.021
Mechanical Behaviour of Basalt / Carbon / Aluminium Fiber Metal Laminates – An Experimental Study Research Article published in The International Journal of Engineering and Science, Vol. 8 (3), 2019
Mechanical Behaviour of Aluminium Powder Modified Carbon/Basalt Reinforced Vinyl Ester Composites Research Article published in IOSR Journal of Polymer and Textile Engineering (IOSR-JPTE),Vol. 6 (1), 52-58, 2019
Fabrication and Characterization of Basalt / Kevlar / Aluminium Fiber Metal Laminates for Automobile Applications Research Article published in International Journal of Materials Science, Volume 14 (1), 1-9, 2019
Mechanical and Tribological Behaviour of Al2O3 & SiC Reinforced Aluminium Composites Fabricated via Powder Metallurgy Research Article published in IOP Conf. Series: Materials Science and Engineering, 561, 2019. doi:10.1088/1757-899X/561/1/012038.
Study of Corrosion Behavior of Carbon Fiber Reinforced Plastics (CFRPs) Research Article published in Materials Science Forum, Vol. 969, pp 175-180, DOI: 10.4028/www.scientific.net/MSF.969.175.
Production and Optimization of Nano Crystalline Materials, 2019 Book chapter published in Lambard academic publications, UK, ISBN Number: 978-613-9-84188-2.
Significance of Boron Nitride in Composites and Its Applications, 2019 Book chapter published in Intech Open Publications, UK, DOI:10.5772/intechopen.81555
Guest Talk On Development of advanced meta materials for industrial revolution 4.0 One day Guest talk and hands on training delivered for the Mechanical students on the part of skill development program; QIS College of Engineering and Technology – Autonomous, Ongole, Andhra Pradesh.
7 Mr. S Prakash M.E., (PhD) Influence of Feeding Techniques in Bottom Tapping Stir Casting Process for Fabrication of Alumina Nano-filler-reinforced Aluminium Composites Research Article published in Transactions of the Indian Institute of Metals (TIIM) – Springer (Anna university Annexure – 1 listed journal), 12 April 2020, Volume 73, Issue 5, Pages 1265–1272
8 Mr.R.Hariharan,

M.E.,

Mechanical and Tribological behavior of Al/Al2o3 and Al/SiC Aluminium Composite Fabricated via Powder Metallurgy. Presented paper in “ICMSMT 2019”, Aloft International, Coimbatore
Fabrication and Characterization of Basalt / Kevlar / Aluminium Fiber Metal Laminates for Automobile Applications Published paper in International Journal of Materials Science, Volume 14 (1), 1-9, 2019
Mechanical and Tribological Behaviour of Al2O3 & SiC Reinforced Aluminium Composites Fabricated via Powder Metallurgy Presented paper in IOP Conf. Series: Materials Science and Engineering, 561, 2019. doi:10.1088/1757-899X/561/1/012038.
9 Mr. P.Kannan, M.E., Fabrication of Three Mode Four Wheeler Steering Mechanism Presented paper in “National Conference on Recent Trends In Engineering Technology”, organized by Vetri Vinayaha College Of Engineering And Technology, Thottiyam.

Staff Achievements (2018-19)

S.NO NAME OF THE FACULTY TITLE OF THE WORK ACHIEVEMENT
1 Dr.R.Sasikumar, M.E., PhD.,  

Investigation of mechanical and electrical properties of Kevlar/E-glass and Basalt/E-glass reinforced hybrid composites.

 

Published paper in “International Journal of Mechanical and Production Engineering Research and Development”, 2018, Vol. 8(3), 591-598.

 

Multiwall Carbon Nano tube Reinforced Silicone for Aerospace Applications.

 

Published paper in “International Journal of Mechanical and Production Engineering Research and Development”, Vol. 8 (4), 743-752, 2018.

 

Superior material properties of hybrid filler-reinforced aluminum MMC through double- layer feeding technique adopted  in bottom tapping stir casting

 

Published paper in “High Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes (Anna university Annexure – 1 listed journal)” ISSN Print: 1093-3611, ISSN Online: 1940- 4360 Vol. 22 Issue: 4, Article No.28877, Pages 249-258, (Sep 2018).

 

2 Mr.I.Sirajudeen, M.Tech.,  

Hazards Measuring and Risk Controls in Textile Industry

 

Presented paper in One day National conference on “Challenges and Opportunities for Mechanical Engineers (COME-2019), organized by Kongunadu College of Engineering and Technology, Thottiyam

 

 

Hazards Measuring and Risk Controls in Textile Industry

 

Published paper in “International Journal of Innovative Research in Science, Engineering and Technology”, Vol:8, issue:5,P.No:4976-4987, (April 2019).

 

 

 

Safety audit about fleet management in BPCL Karur terminal

 

Published paper in “International Journal of Management, Technology And Engineering”, Vol:9, issue:4,P.No:3143-3147, (April 2019)

 

Design and CFD analysis of brake disc.

 

Published paper in “International Journal of Management, Technology And Engineering”, Vol:9, issue:4,P.No:3155-3157, Publ.date: April2019

   

Safety in ACETECH Machinery India PVL.

 

Published paper in “International Journal of Management, Technology And Engineering”, Vol:9, issue:4,P.No:3165-3168,

3 Mr.M.S.Santhosh, M.E., (PhD)  

Mechanical, Microstructure and wear behavior of the material AA6061 reinforced SiC with different leaf ashes using advanced stir casting method.

 

Presented paper in the conference “i7C – 2018” organized by HAL, Bangalore, Karnataka.

 

Mechanical Behavior of Basalt/E-Glass Reinforced Epoxy Matrix Composites -Preliminary Experimental Study.

 

Presented paper in conference on   “Advances in Polymeric Materials (APM 2019)”, organized by CIPET Chennai, Tamilnadu.

 

Investigation of mechanical and electrical properties of Kevlar/E-glass and Basalt/E-glass reinforced hybrid composites.

Published paper in International Journal of Mechanical and Production Engineering Research and Development, 2018, Vol. 8(3), 591-598.
 

Multiwall Carbon Nanotube Reinforced Silicone for Aerospace Applications.

 

Published paper in International Journal of Mechanical and Production Engineering Research and Development, Vol. 8 (4), 743-752, 2018

Design and Analysis of Connecting Tie Rod Assembly for Automotive Application Published paper in Journal of Engineering Sciences, Vol. 5 (2), D15 – D20, 2018.
Mechanical, Microstructure and wear behavior of the material AA6061 reinforced SiC with different leaf ashes using advanced stir casting method Published paper in International Journal of Engineering and Advanced Technology (IJEAT), Vol. 8 (2s), 366-371, 2018.
Mechanical Behavior of Basalt/E-Glass Reinforced Epoxy Matrix Composites -Preliminary Experimental Study Presented paper on “Advances in Polymeric Materials (APM 2019)”, CIPET Chennai, Tamilnadu.
Effect of Pineapple/Coconut Sheath Fiber Reinforced with Polyester Resin Matrix Presented paper in “ICMME 2019”, School of Mechanical Engineering, Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya University (SCVMV).
4  

Mr. S Prakash M.E., (PhD)

Evaluation of Microstructure and Mechanical Properties of Hybrid Aluminum Metal Matrix Composites for Aircraft Wings Presented paper in the conference on “Advancements in Mechanical, Manufacturing and Civil Engineering (NCAMMCE – 18)”, at M Kumarasamy College of Engineering, Karur
Investigation of Mechanical Properties of AA6061 Hybrid Metal Matrix Composites Presented paper in the conference on Innovations in Science, Engineering and Technology for sustainable development (ISETSD- 2018), at Muthayammal Engineering College, Rasipuram.
Superior material properties of hybrid filler-reinforced aluminum MMC through double- layer feeding technique adopted  in bottom tapping stir casting Published paper in High Temperature Material Processes: An International  Quarterly of High-Technology Plasma Processes (Anna university Annexure – 1 listed journal) ISSN Print: 1093-3611, ISSN Online: 1940- 4360 Vol. 22 Issue: 4, Article No.28877, Pages 249-258, ( Sep 2018)
5 Mr.R.Hariharan,

M.E.,

Mechanical and Morphological Behavior of Prosopis Juliflora / Rice Husk Reinforced Bio Composites.  

Presented paper in “Recent Advances in Materials and Manufacturing (ICRAMM 2019)”, KLE Sheshgiri College of Engineering, Belagavi, Karnataka.

6 Mr. P.Kannan, M.E., Fabrication of Three Mode Four Wheeler Steering Mechanism Presented paper in “National Conference On Recent Trends In Engineering Technology”, organized by Vetri Vinayaha College Of Engineering And Technology, Thottiyam.